电话:
400-7060-959
传真:
+86 10 56315212-8813
电子邮件:
orders@antibodies-online.cn

CCL2 ELISA 试剂盒

CCL2 适用: 大鼠 Colorimetric Sandwich ELISA Cell Lysate, Tissue Lysate
产品编号 ABIN625211
发货至: 中国
  • 抗原 See all CCL2 ELISA试剂盒
    CCL2 (Chemokine (C-C Motif) Ligand 2 (CCL2))
    适用
    • 12
    • 9
    • 6
    • 4
    • 3
    • 3
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    大鼠
    检测方法
    Colorimetric
    实验类型
    Sandwich ELISA
    应用范围
    ELISA
    原理
    Rat MCP-1 (CCL2) ELISA Kit for cell and tissue lysate samples.
    样品类型
    Cell Lysate, Tissue Lysate
    Analytical Method
    Quantitative
    特异性
    The antibody pair provided in this kit recognizes rat MCP-1 / CCL2.
    灵敏度
    15 pg/mL
    产品特性
    • Strip plates and additional reagents allow for use in multiple experiments
    • Quantitative protein detection
    • Establishes normal range
    • The best products for confirmation of antibody array data
    组件
    • Pre-Coated 96-well Strip Microplate
    • Wash Buffer
    • Stop Solution
    • Assay Diluent(s)
    • Lyophilized Standard
    • Biotinylated Detection Antibody
    • Streptavidin-Conjugated HRP
    • TMB One-Step Substrate
    试剂未包括
    • Distilled or deionized water
    • Precision pipettes to deliver 2 μL to 1 μL volumes
    • Adjustable 1-25 μL pipettes for reagent preparation
    • 100 μL and 1 liter graduated cylinders
    • Tubes to prepare standard and sample dilutions
    • Absorbent paper
    • Microplate reader capable of measuring absorbance at 450nm
    • Log-log graph paper or computer and software for ELISA data analysis
    • Cell lysate buffer
    Featured
    Discover our best selling CCL2 ELISA Kit
    Top Product
    Discover our top product CCL2 ELISA Kit
  • 样本量
    100 μL
    板类型
    Pre-coated
    实验流程
    1. Prepare all reagents, samples and standards as instructed in the manual.
    2. Add 100 μL of standard or sample to each well.
    3. Incubate 2.5 h at RT or O/N at 4 °C.
    4. Add 100 μL of prepared biotin antibody to each well.
    5. Incubate 1 h at RT.
    6. Add 100 μL of prepared Streptavidin solution to each well.
    7. Incubate 45 min at RT.
    8. Add 100 μL of TMB One-Step Substrate Reagent to each well.
    9. Incubate 30 min at RT.
    10. Add 50 μL of Stop Solution to each well.
    11. Read at 450 nm immediately.
    试剂准备
    1. Bring all reagents and samples to room temperature (18 - 25 °C) before use.
      2. Sample dilution: Tissue lysate and cell lysate sample should be diluted at least 5-fold with 1x Sample Diluent Buffer.
      3. Sample Diluent Buffer/Assay Diluent should be diluted 5-fold with deionized or distilled water.
      4. Preparation of standard: Briefly spin the vial of Item C. Add 400 µL 1x Sample Diluent Buffer (Item D, Sample Diluent Buffer should be diluted 5-fold with deionized or distilled water before use) into Item C vial to prepare a 50 ng/mL standard. Dissolve the powder thoroughly by a gentle mix. Add 180 µL MCP-1 standard from the vial of Item C, into a tube with 320 µL 1x Sample Diluent Buffer to prepare a 18,000 pg/mL stock standard solution. Pipette 400 µL 1x Sample Diluent Buffer into each tube. Use the stock standard solution to produce a dilution series . Mix each tube thoroughly before the next transfer. 1x Sample Diluent Buffer serves as the zero standard (0 pg/mL). 200 µL 200myl 200 µL 200 µL 200 µL 180 µL standard + 320 µL 200 µL 18,000 6,000 2,000 666.7 222.2 74.07 24.67 0 pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL
      5. If the Wash Concentrate (20x) (Item B) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 ml of Wash Buffer Concentrate into deionized or distilled water to yield 400 ml of 1x Wash Buffer.
      6. Briefly spin the Detection Antibody vial (Item F) before use. Add 100 µL of 1x Assay Diluent into the vial to prepare a detection antibody concentrate. Pipette up and down to mix gently (the concentrate can be stored at 4 °C for 5 days). The detection antibody concentrate should be diluted 65-fold with 1x Assay Diluent and used in step 4 of Part VI Assay Procedure.
      7. Briefly spin the HRP-Streptavidin concentrate vial (Item G) and pipette up and down to mix gently before use. HRP-Streptavidin concentrate should be diluted 100-fold with 1x Assay Diluent. For example: Briefly spin the vial (Item G) and pipette up and down to mix gently . Add 100 µL of HRP-Streptavidin concentrate into a tube with 10 ml 1x Assay Diluent to prepare a final 100 fold diluted HRP-Streptavidin solution. Mix well.
      8. Cell lysate buffer should be diluted 2-fold with deionized or distilled water (for cell lysate and tissue lysate).
    实验流程
    1. Bring all reagents and samples to room temperature (18 - 25 °C) before use. It is recommended that all standards and samples be run at least in duplicate.
      2. Add 100 µL of each standard (see Reagent Preparation step 2) and sample into appropriate wells. Cover well and incubate for 2.5 hours at room temperature or over night at 4 °C with gentle shaking. We recommend using 50-500 myg/mL of total protein for lysate sample. The amount of sample used depends on the abundance of target protein. More of the sample can be used if signals are too weak. If signals are too strong, the sample can be diluted further.
      3. Discard the solution and wash 4 times with 1x Wash Solution. Wash by filling each well with Wash Buffer (300 myl) using a multi-channel Pipette or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
      4. Add 100 µL of 1x prepared biotinylated antibody (Reagent Preparation step 6) to each well. Incubate for 1 hour at room temperature with gentle shaking.
      5. Discard the solution. Repeat the wash as in step
      6. Add 100 µL of prepared Streptavidin solution (see Reagent Preparation step 7) to each well. Incubate for 45 minutes at room temperature with gentle shaking.
      7. Discard the solution. Repeat the wash as in step
      8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with gentle shaking.
      9. Add 50 µL of Stop Solution (Item I) to each well. Read at 450 nm immediately.
    结果分析

    Calculate the mean absorbance for each set of duplicate standards, controls and samples, and subtract the average zero standard optical density. Plot the standard curve on log-log graph paper or using Sigma plot software, with standard concentration on the x-axis and absorbance on the y-axis. Draw the best-fit straight line through the standard points.
    Typical Data: These standard curves are for demonstration only. A standard curve must be run with each assay. Assay Diluent Rat MCP-1 concentration (pg/mL) O D =4 50 (n m ) 0.001 0.01 0.1 1 10 10 100 1,000 10,000 100,000
    Sensitivity: The minimum detectable dose of MCP-1 is typically less than 15 pg/mL.
    Recovery: Recovery was determined by spiking various levels of rat MCP-1 into rat cell lysate and tissue lysate. Mean recoveries are as follows: Sample Type Average % Recovery Range ( %) Tissue lysate 92.75 83-103 Cell lysate 93.73 84-105
    Linearity: Sample Type Tissue Cell Lysate lysate 1:2 Average % of 92 93 Expected Range ( %) 83-103 84-104 1:4 Average % of 93 94 Expected Range ( %) 84-104 85-105
    Reproducibility: Intra-Assay: CV<10 % Inter-Assay: CV<12 %

    实验精密度
    Intra-Assay: CV< 10 % Inter-Assay: CV< 12 %
    限制
    仅限研究用
  • 注意事项
    Avoid repeated freeze-thaw cycles.
    储存条件
    -20 °C
    储存方法
    The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.
    有效期
    6 months
  • Shen, Wang, Chou, Liou, Yen, Wang, Liao: "Dimemorfan protects rats against ischemic stroke through activation of sigma-1 receptor-mediated mechanisms by decreasing glutamate accumulation." in: Journal of neurochemistry, Vol. 104, Issue 2, pp. 558-72, (2008) (PubMed).

  • 抗原 See all CCL2 ELISA试剂盒
    CCL2 (Chemokine (C-C Motif) Ligand 2 (CCL2))
    别名
    MCP-1 / CCL2 (CCL2 产品)
    别名
    GDCF-2 ELISA Kit, HC11 ELISA Kit, HSMCR30 ELISA Kit, MCAF ELISA Kit, MCP-1 ELISA Kit, MCP1 ELISA Kit, SCYA2 ELISA Kit, SMC-CF ELISA Kit, AI323594 ELISA Kit, JE ELISA Kit, Scya2 ELISA Kit, Sigje ELISA Kit, MCP-1A ELISA Kit, MCP1A ELISA Kit, C-C motif chemokine ligand 2 ELISA Kit, chemokine (C-C motif) ligand 2 ELISA Kit, C-C motif chemokine 2 ELISA Kit, CCL2 ELISA Kit, Ccl2 ELISA Kit, LOC101120093 ELISA Kit
    背景
    C-C motif chemokine 2 (Immediate-early serum-responsive protein JE) (Monocyte chemoattractant protein 1) (Monocyte chemotactic protein 1) (MCP-1) (Small-inducible cytokine A2)
    基因ID
    24770
    UniProt
    P14844
    途径
    Cellular Response to Molecule of Bacterial Origin, Positive Regulation of Immune Effector Process, ER-Nucleus Signaling, Unfolded Protein Response, The Global Phosphorylation Landscape of SARS-CoV-2 Infection
You are here:
客服