电话:
+86 (0512) 65829739
传真:
+86 (010) 6788 5057
电子邮件:
orders@antibodies-online.cn

IgM ELISA 试剂盒

This Turkey IgM ELISA Kit is a Colorimetric ELISA Kit designed to quantify Turkey IgM.
产品编号 ABIN956348
发货至: 中国

Quick Overview for IgM ELISA 试剂盒 (ABIN956348)

抗原

See all IgM ELISA试剂盒
IgM

适用

  • 9
  • 7
  • 6
  • 5
  • 4
  • 4
  • 4
  • 3
  • 3
  • 3
  • 3
  • 2
  • 1
  • 1
  • 1
Turkey

检测方法

Colorimetric

实验类型

Sandwich ELISA

应用范围

ELISA

样品类型

Plasma, Serum
  • Analytical Method

    Quantitative

    产品特性

    The turkey IgM ELISA kit is intended for measurement of IgM in serum, plasma and egg-yolk extracts. Goat anti-turkey IgM (mu specific chain) antibodies are used for solid phase (microtiter wells) immobilization and horseradish peroxidase (HRP) conjugated goat anti-turkey IgM (mu chain specific) antibodies are used for detection. Normal turkey IgM levels are in the range of 2-5 mg/mL in serum or plasma.Test samples are diluted and incubated in the microtiter wells for 45 minutes alongside prepared turkey IgM calibrators. The microtiter wells are subsequently washed and HRP conjugate is added and incubated for 45 minutes. IgM molecules are thus sandwiched between the immobilization and detection antibodies. The wells are then washed to remove unbound HRP-labeled antibodies and TMB Reagent is added and incubated for 20 minutes at room temperature. This results in the development of a blue color. Color development is stopped by the addition of Stop Solution, changing the color to yellow, and optical density is measured spectrophotometrically at 450 nm. The concentration of IgM is proportional to the optical density of the test sample and is derived from a calibration curve.

    组件

    Anti turkey IgM coated 96-well plate (12 strips of 8 wells)
    Reference calibrator (lyophilized)
    10X Diluent, 25 mL
    HRP Conjugate Reagent, 11 mL
    20X Wash Solution, 50 mL
    TMB Reagent (One-step), 11 mL
    Stop Solution (1N HCl), 11 mL.

    试剂未包括

    Precision pipettes and tips
    Distilled or de-ionized water
    Vortex mixer
    Absorbent paper or paper towels
    Graph paper (PC graphing software is optional)
    Polypropylene or glass tubes
    Plate reader with an optical density range of 0-4 at 450 nm.
    Micro-Plate incubator/shaker mixing speed of ~150 rpm
    Plate washer
  • 板类型

    Pre-coated

    样品制备

    General Note: In order to obtain values within range of the calibration curve, we suggest that samples initially be diluted 40,000 fold using the following procedure for each sample to be tested:
    1. Dispense 497.5 µL of 1X diluent into two tubes.
    2. Pipette and mix 2.5 µL of the serum/plasma sample into the first tube and mix. This provides a 200 fold diluted sample.
    3. Mix 2.5 µL of the 200 fold diluted sample with the 497.5 µL of diluent in the second tube. This provides a 40,000 fold dilution of the sample.
    4. Repeat this procedure for each sample to be tested.

    实验流程

    1. Secure the desired number of coated wells in the holder.
      2. Dispense 100 µL of calibrators and diluted samples into the wells (we recommend that samples be tested in duplicate).
      3. Incubate on an orbital micro-plate shaker at 100-150 rpm at room temperature (18-25°C) for 45 minutes.
      4. Aspirate the contents of the microtiter wells and wash the wells 5 times with 1x wash solution using a plate washer (400 µL/well). The entire wash procedure should be performed as quickly as possible.
      5. Strike the wells sharply onto absorbent paper or paper towels to remove all residual wash buffer.
      6. Add 100 µL of enzyme conjugate reagent into each well.
      7. Incubate on an orbital micro-plate shaker at 100-150 rpm at room temperature (18-25°C) for 45 minutes.
      8. Wash as detailed in 4 to 5 above.
      9. Dispense 100 µL of TMB Reagent into each well.
      10. Gently mix on an orbital micro-plate shaker at 100-150 rpm at room temperature (18-25°C) for 20 minutes.
      11. Stop the reaction by adding 100 µL of Stop Solution to each well.
      12. Gently mix. It is important to make sure that all the blue color changes to yellow.
      13. Read the optical density at 450 nm with a microtiter plate reader within 5 minutes.

    结果分析

    1. Calculate the average absorbance values (A450) for each set of reference calibrators and samples.
      2. Construct a calibration curve by plotting the mean absorbance obtained from each reference calibrator against its concentration in ng/mL on linear graph paper, with absorbance values on the vertical or Y-axis and concentrations on the horizontal or X-axis.
      3. Using the mean absorbance value for each sample, determine the corresponding concentration of IgM in ng/mL from the calibration curve.
      4. Multiply the derived concentrations by the dilution factor to determine the actual concentration of IgM in the sample.
      5. PC graphing software may be used for the above steps.
      6. If the OD450 values of the sample fall outside the calibration curve, samples should be diluted appropriately and re-tested.

    限制

    仅限研究用
  • 储存方法

    The test kit will remain stable until the expiration date provided that the components are stored as described above. The microtiter plate should be kept in a sealed bag with desiccant to minimize exposure to damp air.

    有效期

    The expiry date is stated on the label.
  • 抗原 See all IgM ELISA试剂盒

    IgM

    物质类

    Antibody
You are here:
Chat with us!