电话:
400-7060-959
传真:
+86 10 56315212-8813
电子邮件:
orders@antibodies-online.cn

HSPD1 ELISA 试剂盒

HSPD1 适用: 人 Colorimetric Sandwich ELISA 0.156-10 ng/mL Cell Culture Supernatant, Plasma, Serum
产品编号 ABIN455304
发货至: 中国
  • 抗原 See all HSPD1 ELISA试剂盒
    HSPD1 (Heat Shock 60kDa Protein 1 (Chaperonin) (HSPD1))
    适用
    • 5
    • 4
    • 3
    • 3
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    检测方法
    Colorimetric
    实验类型
    Sandwich ELISA
    检测范围
    0.156-10 ng/mL
    最低检测浓度
    0.156 ng/mL
    应用范围
    ELISA
    原理
    This immunoassay kit allows for the specific measurement of human heat shock protein 60 (HSP60) concentrations in cell culture supernates, serum, and plasma.
    样品类型
    Cell Culture Supernatant, Serum, Plasma
    Analytical Method
    Quantitative
    特异性
    This assay recognizes recombinant and natural human hsp60.
    交叉反应 (详细)
    No significant cross-reactivity or interference was observed.
    产品特性
    Homo sapiens,Human,60 kDa heat shock protein, mitochondrial,60 kDa chaperonin,Chaperonin 60,CPN60,Heat shock protein 60,HSP-60,Hsp60,HuCHA60,Mitochondrial matrix protein P1,P60 lymphocyte protein,
    组件
    Reagent (Quantity): Assay plate (1), 2 Standard (2), Sample Diluent (1x20ml), Assay Diluent A (1x10ml), Assay Diluent B (1x10ml), Detection Reagent A 1x120µl Detection Reagent B 1x120µl Wash Buffer(25 x concentrate) (1x30ml), Substrate (1x10ml), Stop Solution (1x10ml)
    Featured
    Discover our best selling HSPD1 ELISA Kit
    Top Product
    Discover our top product HSPD1 ELISA Kit
  • 样本量
    100 μL
    板类型
    Pre-coated
    实验流程
    This assay employs the quantitative sandwich enzyme immunoassay technique. A monoclonal antibody specific for HSP60 has been pre-coated onto a microplate. Standards and samples are pipetted into the wells and any HSP60 present is bound by the immobilized antibody. An enzyme-linked monoclonal antibody specific for HSP60 is added to the wells. Following a wash to remove any unbound antibody-enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of HSP60 bound in the initial step. The color development is stopped and the intensity of the color is measured.
    试剂准备

    Bring all reagents to room temperature before use. Wash Buffer - If crystals have formed in the concentrate, warm to room temperature and mix gently until the crystals have completely dissolved. Dilute 20 mL of Wash Buffer Concentrate into deionized or distilled water to prepare 500 mL of Wash Buffer. Standard - Reconstitute the Standard with 1.0 mL of Sample Diluent. This reconstitution produces a stock solution of 10,000 pg/mL. Allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making serial dilutions. The undiluted standard serves as the high standard (10,000 pg/mL). The Sample Diluent serves as the zero standard (0 pg/mL). Detection Reagent A and B - Dilute to the working concentration specified on the vial label using 3 Assay Diluent A and B (1:100), respectively.

    样品收集
    Cell culture supernates - Remove particulates by centrifugation and assay immediately or aliquot and store samples at ≤ -20 °C. Avoid repeated freeze-thaw cycles. Serum - Use a serum separator tube (SST) and allow samples to clot for 30 minutes before centrifugation for 15 minutes at approximately 1000 x g. Remove serum and assay immediately or aliquot and store samples at -20 °C. Plasma - Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples for 15 minutes at 1000 x g at 2 - 8 °C within 30 minutes of collection. Store samples at ≤ -20 °C. Avoid repeated freeze-thaw cycles. Note: Citrate plasma has not been validated for use in this assay.
    实验流程

    Allow all reagents to reach room temperature. Arrange and label required number of strips.
    1. Prepare all reagents, working standards and samples as directed in the previous sections.
    2. Add 100 uL of Standard, Control, or sample per well. Cover with the adhesive strip. Incubate for 2 hours at 37 °C.
    3. Remove the liquid of each well, don’t wash.
    4. Add 100 uL of Detection Reagent A to each well. Incubate for 1 hour at 37°C. Detection Reagent A may appear cloudy. Warm to room temperature and mix gently until solution appears uniform.
    5. Aspirate each well and wash, repeating the process three times for a total of three washes. Wash by filling each well with Wash Buffer (350 uL) using a squirt bottle, multi-channel pipette, manifold dispenser or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
    6. Add 100 uL of Detection Reagent B to each well. Cover with a new adhesive strip.Incubate for 1 hours at 37 °C.
    7. Repeat the aspiration/wash as in step
    5. 8. Add 90 uL of Substrate Solution to each well. Incubate for 30 minutes at room temperature. Protect from light.
    9. Add 50 uL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
    10. Determine the optical density of each well within 30 minutes, using a microplate reader set to 450 nm.
    Important Note:
    1. The wash procedure is critical. Insufficient washing will result in poor precision and falsely elevated absorbance readings.
    2. It is recommended that no more than 32 wells be used for each assay run if manual pipetting is used since pipetting of all standards, specimens and controls should be completed within 5 minutes. A full plate of 96 wells may be used if automated pipetting is available.
    3. Duplication of all standards and specimens, although not required, is recommended.
    4. When mixing or reconstituting protein solutions, always avoid foaming.
    5. To avoid cross-contamination, change pipette tips between additions of each standard level, between sample additions, and between reagent additions. Also, use separate reservoirs for each reagent.
    6. To ensure accurate results, proper adhesion of plate sealers during incubation steps is necessary. 4

    结果分析

    Average the duplicate readings for each standard, control, and sample and subtract the average zero standard optical density. Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the y-axis against the concentration on the x-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the HSP60 concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.

    限制
    仅限研究用
  • 注意事项
    1. The kit should not be used beyond the expiration date on the kit label.
    2. Do not mix or substitute reagents with those from other lots or sources.
    3. If samples generate values higher than the highest standard, further dilute the samples with the Assay Diluent and repeat the assay. Any variation in standard diluent, operator, pipetting technique, washing technique,incubation time or temperature, and kit age can cause variation in binding.
    4. This assay is designed to eliminate interference by soluble receptors, ligands, binding proteins, and other factors present in biological samples. Until all factors have been tested in the Immunoassay, the possibility of interference cannot be excluded.
    储存条件
    4 °C/-20 °C
    储存方法
    The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20 °C upon being received. The other reagents can be stored at 4 °C.
  • 抗原 See all HSPD1 ELISA试剂盒
    HSPD1 (Heat Shock 60kDa Protein 1 (Chaperonin) (HSPD1))
    别名
    HSPD1 (HSPD1 产品)
    别名
    CPN60 ELISA Kit, GROEL ELISA Kit, HLD4 ELISA Kit, HSP-60 ELISA Kit, HSP60 ELISA Kit, HSP65 ELISA Kit, HuCHA60 ELISA Kit, SPG13 ELISA Kit, chaperonin ELISA Kit, cpn60 ELISA Kit, groel ELISA Kit, hld4 ELISA Kit, hsp60 ELISA Kit, hsp65 ELISA Kit, spg13 ELISA Kit, 60kDa ELISA Kit, Hsp60 ELISA Kit, 12 ELISA Kit, BP5 ELISA Kit, CG12101 ELISA Kit, Cpn60 ELISA Kit, Dmel\\CG12101 ELISA Kit, Dmhsp60 ELISA Kit, G62 ELISA Kit, HSP60A ELISA Kit, Hsp60A ELISA Kit, IEF16 ELISA Kit, Mmp-P1 ELISA Kit, SSP 7506 ELISA Kit, d-hsp60 ELISA Kit, hsp60A ELISA Kit, l(1)10Ac ELISA Kit, l(1)BP5 ELISA Kit, l(1)G8 ELISA Kit, l(1)HM21 ELISA Kit, l(1)L12 ELISA Kit, l(1)dp025 ELISA Kit, cb863 ELISA Kit, fa04a05 ELISA Kit, fb22d10 ELISA Kit, fi27b05 ELISA Kit, id:ibd2197 ELISA Kit, sb:cb144 ELISA Kit, wu:fa04a05 ELISA Kit, wu:fb22d10 ELISA Kit, wu:fi04a12 ELISA Kit, wu:fi27b05 ELISA Kit, MIF4 ELISA Kit, MNA2 ELISA Kit, mopA ELISA Kit, groL ELISA Kit, crpA ELISA Kit, Hspd1-30p ELISA Kit, heat shock protein family D (Hsp60) member 1 ELISA Kit, heat shock protein family D (Hsp60) member 1 S homeolog ELISA Kit, 60 kDa heat shock protein, mitochondrial ELISA Kit, heat shock protein 1 (chaperonin) ELISA Kit, Heat shock protein 60A ELISA Kit, heat shock 60 protein 1 ELISA Kit, chaperone ATPase HSP60 ELISA Kit, molecular chaperone GroEL ELISA Kit, thermosome subunit ELISA Kit, chaperonin GroEL ELISA Kit, mitochondrial chaperonin ELISA Kit, heat shock protein family D member 1 ELISA Kit, HSPD1 ELISA Kit, hspd1.S ELISA Kit, hspd1 ELISA Kit, LOC100414401 ELISA Kit, Hspd1 ELISA Kit, Hsp60A ELISA Kit, HSP60 ELISA Kit, groEL ELISA Kit, MMP_RS07785 ELISA Kit, groEl ELISA Kit, LOC100136430 ELISA Kit
    背景
    Heat shock protein 60s (hsp60) are remarkably immunogenic, and both T-cell and antibody responses to hsp60 have been reported in various inflammatory conditions. Analysis of the nucleotide sequences of the TCR demonstrated that human hsp60-reactive T-cell clones and periodontitis lesion-infiltrating T cells have the same receptors, suggesting that hsp60-reactive T cells accumulate in periodontitis lesions. Analysis of the cytokine profile demonstrated that hsp60-reactive PBMC produced significant levels of gamma interferon (IFN-gamma) in periodontitis patients, whereas P. gingivalis GroEL did not induce any skewing toward a type1 or type2 cytokine profile. In control subjects no significant expression of IFN-gamma or interleukin 4 was induced. These results suggest that periodontitis patients have human hsp60-reactive T cells with a type 1 cytokine profile in their peripheral blood T-cell pools. Heat shock protein 60 (HSP60) is homologous to HSP65 (a major antigenic mycobacterial protein) and E. coli GroEL. HSP60, also referred to as chaperonin-60, P1 and mitonin, has been classified as a member of a family of proteins termed chaperonins which act to recognize and stabilize polypeptide intermediates during folding, assembly and disassembly. HSP60 is an abundant protein which is constitutively expressed and is induced by environmental stress. HSP60 exists as a large oligomer composed of 14 ~60 kDa subunits arranged as two stacked rings.
    途径
    Activation of Innate immune Response, Regulation of Leukocyte Mediated Immunity, Positive Regulation of Immune Effector Process, Production of Molecular Mediator of Immune Response, Positive Regulation of Endopeptidase Activity
You are here:
客服